A Kamrar water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
A credible water damage inspection in Kamrar does more than identify where the water is visible. It traces where the water went — through structural assemblies, behind finishes, and into below-grade spaces — and produces a written, defensible assessment you can act on or present to an insurance carrier, a buyer, or a remediation contractor.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Kamrar inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Kamrar inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
Every COS Water Damage Restoration Kamrar water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Our Kamrar inspection service covers two distinct use cases that require slightly different approaches: pre-remediation inspection (mapping an active or recent water event for claim documentation and remediation scoping) and pre-purchase or post-remediation verification inspection (confirming whether previous water damage was properly remediated or whether current conditions indicate an ongoing or previous water problem). Both use the same instrument suite and produce the same written report format, but the findings are interpreted differently for each use case.
Here are the specific inspection scenarios and assembly types our Kamrar team handles.
Active event inspection is the step that prevents under-scoped remediation and missed hidden damage.
Real estate transactions in Kamrar frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Kamrar buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
After a water damage remediation project is completed in a Kamrar property — whether by COS Water Damage Restoration or another company — a verification inspection confirms that structural drying was completed to standard moisture content levels and that no hidden moisture was left behind. This inspection is requested by property owners who want independent confirmation of completion, by landlords who need documentation before returning a property to tenancy, and by sellers who need to demonstrate to a buyer that prior water damage was fully resolved. Our Kamrar post-remediation inspection produces a written verification report formatted for real estate and insurance use.
Mold risk assessment in Kamrar is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade moisture in Kamrar properties is underdetected and underlies a significant portion of structural issues discovered later.
When an insurance carrier requests additional documentation for a water damage claim — or when a claim has been disputed based on damage scope — our Kamrar insurance documentation inspection provides the instrument-backed evidence that supports the remediation scope. Thermal images with annotations, moisture meter readings at labeled sensor points, water category determination, and written assessment of the connection between the reported event and the documented damage create a claim file that can withstand adjuster scrutiny.


Call +1-844-499-0972 and describe your situation — active event, pre-purchase, post-remediation, mold concern, or insurance documentation. Our Kamrar scheduler assigns the appropriate inspection type and confirms your appointment. Most Kamrar residential inspections are available within 24-48 hours.
Our Kamrar inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
You understand what was found before you receive the written report.
Report delivered in the format your use case requires, within 48 hours of inspection.



"The thermal imaging session was what sold me on how a proper Kamrar water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"I had noticed a musty smell in a room of my Kamrar home for months before calling COS Water Damage Restoration. Their inspection found active moisture in the subfloor assembly under an area rug — a slow pipe drip that had been going on long enough to saturate the subfloor significantly without any visible surface evidence. The written report documented the moisture readings, the thermal images showing the extent of the affected area, and the recommended scope. I would never have found this without the thermal camera."
"We manage a portfolio of Kamrar rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Kamrar and surrounding communities throughout IA. Call +1-844-499-0972 to schedule your Kamrar inspection.
Whether you need inspection for an active event, a purchase, or post-remediation verification — our Kamrar team produces a written, instrument-backed report. Call +1-844-499-0972 to schedule.
📞 Call +1-844-499-0972 — Schedule Kamrar InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Kamrar, IA